click images
to enlarge

TOOLS AND SUPPLIES


W1 SHUBB
PEGWINDER
STRING WINDER &
PEG PULLER
W1
Shubb guitar string winder & peg puller. Ergonomic, attractive, durable and efficient.
$5.79
35 WATT
PENCIL TIP
SOLDERING IRON
IRON-35W
UL listed 35w soldering iron with pencil tip. Perfect for light electrical repair work.
$12.99
FENDER 3/16"
BASS TRUSS
WRENCH
004-8693-000
Genuine Fender 3/16" hex T-handle truss rod nut wrench for American Series Basses.
$15.79
3M TEMFLEX
ELECTRICAL
TAPE
3M-TAPE
3M Temflex all purpose black electrical tape. 3/4" x 60'.
$2.25
FENDER
CUSTOM
SHOP
CRUZTOOLS
KIT
099-0519-000
Fender Custom Shop Acoustic & Electric Guitar & Bass Tool Kit by CruzTools This kit contains all the basics for most minor adjustments, including a 4-in-1 screwdriver, hex wrenches, ruler, diagonal cutter, capo, feeler gauges and guitar string winder. These are the same high-quality setup tools used by the pros, and everything is stored in a convenient polyester storage pouch that fits easily in your case or gig bag. Hand tools come with limited lifetime warranty.
$69.99

JP
GUITAR TOOL

JP-TOOL
The JP Guitar Tool is made to last. It is the perfect tool for a quick string change or as a setup tool. The carbide cutters will work for all guitar strings, even bass. The screwdrivers and hex tools are the highest quality steel-No worries about stripping the tool or harming your intrument. Carbide string cutter, self opening spring action pliers, .50mm hex, 1.5mm hex, 2.5mm hex, 3mm hex, phillips, flathead, bridge pin puller, protective sheath.
$24.99
NARROW
DOUBLE SIDED FRET
CROWNING FILE
CROWN-FILE-N
Double sided fret crowning file for vintage/narrow frets. Measures 7-1/2" x 5/8" and features a rubber coated handle.
$39.99
MEDIUM
DOUBLE SIDED
FRET CROWNING FILE
CROWN-FILE-M
General purpose fret leveling file. Good for high frets and beveling fret ends. Measures 6-3/8" x 1-1/8" x 3/16".
$39.99
WIDE
DOUBLE SIDED
FRET CROWNING FILE
CROWN-FILE-W
General purpose fret leveling file. Good for high frets and beveling fret ends. Measures 6-3/8" x 1-1/8" x 3/16".
$39.99
GENERAL PURPOSE
FLAT RASP FILE
RASP-FILE-F
General purpose flat rasp file. Rasp cut on one side and a finer second cut on the other side. Measures 8-1/2" x 5/8" and features a rubber coated handle.
$14.99
GENERAL PURPOSE
ROUNDED RASP FILE
RASP-FILE-R
General purpose rounded rasp file. Double sided round and flat rasp cut. Measures 8-1/2" x 3/4" and features a rubber coated handle.
$16.99
HARRIS 10
PIECE NEEDLE
FILE SET
HSP-LF10
Harris 10 piece luthier series needle file set. Includes an assortment of 5-1/2" round, flat, and angled profiles for precision work.
$19.99
GTJPT1 CRUZ TOOLS
GROOVE TECH
JACK & POT
NUT TOOL
GTJPT1
CruzTools Groove Tech jack and pot nut tool. Professional quality tool that fits inch and metric sizes for guitar, bass, amps, and effects. Compact 3-in-1 multi-tool.
$14.99
TAPERED T-HANDLE
WOOD HOLE REAMER
T-REAM
Tapered 5" general purpose wood reamer for 1/8" to 1/2" holes. Features seven cutting flutes for smooth bores and removable "T" handle.
$19.99
005-9322-000 5/16"
TRUSS ROD
WRENCH
005-9322-000
Truss Rod Adjustment Wrench 5/16". Used on most 90s Era basses and the Zone Bass.
$12.99
GUILD USA
TRUSS ROD
WRENCH
005-9241-000
Truss Rod Adjustment Wrench used on most US Guild® Models.
$6.99
099-1028-000
FENDER
STRING
WINDER
099-1028-000
(1) Fender guitar string winder.
$2.99
DUNLOP
PEGWINDER
STRING WINDER
92500609001
Dunlop Pegwinder. Replace Your Strings In Seconds. Black Plastic Crank With Notch Quickly Removes Bridge Pins.
$2.99
199-7911-049 FLOYD ROSE
2MM WRENCH
199-7911-049
Floyd Rose 2MM Hex Wrench.
$.79

199-7913-049 FLOYD ROSE
3MM WRENCH
199-7913-049
Floyd Rose 3MM Hex Wrench.
$.75

CRUZTOOLS
GROOVE TECH
BASS TOOL KIT
GTBAS1
CruzTools Groove Tech tool kit provides everything you need to work on your bass, and an Easy Setup Guide is included that takes the mystery out of it. Tools are professional grade and lifetime guaranteed. Kit includes a precision 6-in-1 screwdriver that contains two each Phillips and slotted tips, and two nut drivers (1/4 and 5/16 -inch to handle Gibson and other truss rod nuts). Also included is a 3 LED flashlight, steel ruler, string cutters, 15-blade thickness gauge, capo, and 8 hex keys that will fit virtually any make of bass. Truss rod sizes have a ball-end. The pouch stores the Easy Setup Guide, plus allows for storage of picks and strings. With a Groove Tech kit, you have the tools and knowledge to easily set up your guitar or bass, and keep it that
$59.99
GRUZTOOLS
STRING CUTTERS
FOR GUITAR & BASS
GTSC1
CruzTools developed the GrooveTech String Cutters specifically for guitar and gass strings. A special induction heat-treatment process prevents blades from denting, and the high-leverage handle design makes even "B" bass strings easy to cut. Comfortable rubber grips feel good in your hands, and the cutters are compact enough to fit into any guitar case or gig bag.
$12.99
CRUZTOOLS
MULTI TOOL
FOR GUITAR & BASS
GTMLT1
The Cruz Multi Tool provides the tools needed for tech work on most makes and models of electric guitars and basses. Seven ball-end hex wrenches are provided, bioth metric and SAE sizes. Bridge saddles are covered with 0.050 inch and 1.5 mm wrenches, and common tremolo sizes are also provided. Two Phillips screwdriver tips (#1 and #2) handle a variety of adjustments, and a 2.5mm slotted screwdriver addresses vintage-style bridge saddle screws. Finally, a ruler is included to help set action. Cruz Tools are professional tech-grade, using a proprietary heat-treated S2 alloy that exceeds ANSI specifications. Polished chrome wrenches and an anodized body round out fit and finish. Measuring only 3 inches long and 3.3 ounces, the Multi-Tool will fit into any case, gig bag or even a pocket.
$18.99
CRUZTOOLS
GROOVE TECH
GUITAR TOOL KIT
GTGTR1
CruzTools Groove Tech tool kit provides everything you need to work on your guitar, and an Easy Setup Guide is included that takes the mystery out of it. Tools are professional grade and lifetime guaranteed. Kit includes a precision 6-in-1 screwdriver that contains two each Phillips and slotted tips, and two nut drivers (1/4 and 5/16 -inch to handle Gibson and other truss rod nuts). Also included is a 3 LED flashlight, steel ruler, string cutters, 15-blade thickness gauge, capo, 11 hex keys that will fit virtually any make of guitar, plus a string winder. Truss rod sizes have a ball-end. The pouch stores the Easy Setup Guide, plus allows for storage of picks and strings. With a Groove Tech kit, you have the tools and knowledge to easily set up your guitar or bass, and keep it that way.
$59.99
93684 "6
STAINLESS
STEEL
POCKET
RULER
93684
6" Stainless Steel Pocket Ruler Harbor Freight Tools Cen-Tech.
$4.99
LT-4216-000 5/16"
BOX
WRENCH
LT-4216-000
5/16" Box Truss Rod Wrench, With Phillips Head Screwdriver on End.
$7.99
GTTRS1 CRUZTOOLS
STANDARD
TRUSS ROD
DRIVER
GTTRS1
CruzTools vintage-style truss rod nuts have very thin yet wide slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage – as evidenced on many vintage guitars and basses. CruzTools developed two screwdrivers specifically for this application. Proper adjustment involves removal of the neck for full nut access, and the Standard Driver provides firm contact over the entire slot width for damage-free adjustment.
$14.99
GTTRC2 CRUZTOOLS
CHEATER
TRUSS ROD
DRIVER
GTTRC2
CruzTools Vintage-style truss rod nuts have very thin yet wide slots and are made of unhardened steel, so normal slotted screwdrivers will cause damage - as evidenced on many vintage guitars and basses. CruzTools developed two screwdrivers specifically for this application. Proper adjustment involves removal of the neck for full nut access, and our Standard Driver provides firm contact over the entire slot width for damage-free adjustment. The Cheater Driver allows quick minor adjustment without removing the neck Both have oversized handles with extra-long shafts for a firm grip and easy access.
$14.99
928-0690-405 FLOYD ROSE
BLACK
TREMOLO
KEY
HOLDER
928-0690-405
Assembly designed to hold the adjustment wrenches for a Floyd Rose tremolo assembly. Can be mounted to the headstock of any vintage or modern guitar.
$14.99
FENDER
CUSTOM
SHOP
ACOUSTIC
CRUZTOOLS
KIT
099-0526-000
Contains all the basics for most minor adjustments, including a 5-in-1 screwdriver with a special 4mm hex adapter for truss rod adjustment, telescopic inspection mirror, ruler, diagonal cutter, capo, feeler gauges, and a string winder. The same high-quality setup tools used by the pros. Everything is stored in a convenient polyester pouch that fits easily in your case or gig bag Limited lifetime warranty.
$69.99