PEDALS

 
023-4501-000 FENDER
DISTORT
PEDAL
COMPETITION
SERIES

023-4501-000

Rock your amp and your guitar tone with the Fender Distortion Pedal, which delivers enormously satisfying distortion and sustain from subtle boost to scorching full-on crunch. Responds ideally to your guitar's volume control and works great with a wide variety of amplifiers. Input Impedance: 500 k Ohm. Output Load Impedance: >10 k Ohm. Equivalent Input Noise: -110dBm. Power Consumption: 11mA. Dimensions: 2-1/2"" W x 2-1/16"" H x 4-3/4"" L Weight: 1.2 lb. Powered by either a 9-volt battery or an AC adapter.
$69.95
023-4502-000 FENDER
DRIVE
PEDAL
COMPETITION
SERIES

023-4502-000

Drive your tone into satisfying and natural-sounding overdrive with the Fender Drive Pedal. Its harmonically rich distortion is ideal for a wide variety of traditional and contemporary gritty rock and blues guitar sounds, and it works great with both tube and solid-state amps. Features Equivalent Input Noise: -110dBm. Input Impedance: 500 kOhm. Output Load Impedance: 10 kOhm. Power Consumption: 11mA. Powered by either a 9-volt battery or an AC adapter (Not included).
$69.95
023-4503-000 FENDER
CHORUS
PEDAL
COMPETITION
SERIES

023-4503-000

The Fender Chorus Pedal delivers an entire spectrum of doubling effects ranging from the subtle to the thick, swirling and rich to transform your guitar sound. Quiet operation in either mono or stereo enlivens and enhances anything you play, from the most delicate phrases to the most powerful passages. Input Impedance: 500 kOhm. Output Load Impedance: >10 kOhm. Equivalent Input Noise: -90dBm. Power Consumption: 20mA. Dimensions: 2-1/2"" W x 2-1/16"" H x 4-3/4"" L. Weight: 1.2 lbs Powered by either a 9-volt battery or an AC adapter (adapter not included).
$79.95
 
SA-2 SNARK
9 VOLT
DAISY CHAIN

SA-2

The Snark Daisy Chain for 9V adapters lets you connnect up to 5 pedals to the power supply.
$9.95
DA-4 SNARK
9 VOLT
ZERO HUM
POWER
SUPPLY

SA1

Snark 9 volt power supply. Fixed 9 volt offers a solid and steady supply that ensures the best tone from every pedal. Powers up to 15 pedals. Zero Hum proprietary noise filtering for silent operation. Input: AC100-240V~ 50- 60Hz 0.1A. Output: DC 9V, 400mA. Optional SA-2 Daisy chain connects up to 5 pedals.
$17.99
MC-5 VISUAL
SOUND
1 SPOT

MC-5
Visual Sound - 1 spot multi-plug 5 cable . Multi-Plug 5 Cable (MC5) Allows connection of up to 5 units to the 1 SPOT adapter. Connect cables together to power even more units (Up to power rating of the 1 SPOT adapter). Unlike most companies, Visual Sound puts a lot of thought into cheap accessories. Believe it or not, the Multi-Plug 5 and 8 Cables are the only "daisy chain" cables featuring right angle plugs and over 12" (300mm) between each plug. We even designed spring-loaded input socket contacts so your MC5, MC8, or converter won't unplug unless you want it to.
$11.99


008-0997-000 FENDER
MUSTANG AMP
FOOTSWITCH
2-BTN

008-0997-000

Connect this 2-button footswitch to your Mustang amplifier (included with the Mustang III, optional for the Mustang IV & V) to enable remote multi-function foot control. Use the Utility menus to assign one of the following functions to the 2-button footswitch: Select presets (up/down), Select Quick Access presets (QA1/QA2), Bypass effects (various combinations), Set TAP interval. Six-button footswitch options: Plug both a 4-button and a 2-button footswitch into your Mustang amplifier to expand your remote control options. By assigning different functions to each footswitch you can create more than a dozen different foot control combinations. For example, you could assign Quick Access presets to the 4-button footswitch and Up/Down presets to the 2-button footswitch. Or you could bypass effects with the 4-button footswitch and select presets with the 2-button footswitch. The choice is up to you.
$29.99
023-4515-000 FENDER
WAH
PEDAL
FWP-1
023-4515-000
Fender's FWP-1 Wah Pedal delivers classic and rich vocal sound with a smooth feel. An internal switch enables either "buffered" or "classic" output, allowing greater pedalboard placement flexibility. 8.250" (209.6mm) L; 3.875" (98.4mm) W; 2.500" (63.5mm) H.
$89.99
023-4507-000 FENDER
YNGWIE
MALMSTEEN
PEDAL

023-4507-000

The Yngwie Malmsteen Overdrive Pedal unleashes the pure and powerful heavy tone of the neoclassical shred master. This high-quality, compact and rugged stage-worthy pedal with special tone-shaping circuitry was designed in close collaboration with Malmsteen himself. Features: True-bypass switching. Die-cast housing with high-gloss red finish. Gain and level controls. Red LED indicator. Rubber feet (user-installed). AC and 9-volt battery operation external power supply sold separately.
$84.77
099-4049-000 FENDER
1-BUTTON
FOOTSWITCH
ON-OFF

099-4049-000

Fender 1-Button ON-OFF Footswitch. Features 1/4" plug and 12' cable. Used for Mustang I, Mustang II, FM Series and Blues Junior amplifiers.
$19.99
005-7219-000 FENDER
CYBER
4-BTN
FOOTSWITCH

005-7219-000

Genuine Fender 4-Button Footswitch, for use with Cyber-Twin amps. Connecting cable is included. Cyber-Twin's Four-Button, Quick Access Footswitch. It's a "key recall" function switch that allows users to quickly call up any of four preset Fender Amp models with their respective reverb and other effects. Comes with the 5-pin DIN (MIDI-type) connector cord.
$49.99
11900-11

SEYMOUR
DUNCAN KILLING
FLOOR
HIGH
GAIN
PEDAL

11900-011

The Killing Floor High Gain Boost is both a volume boost and a musical amp-like overdrive all in one. Description Gives you both a volume boost and a musical amp-like overdrive all in one, with an unmistakable, undeniable bluesy feel. Use it to boost your overall output for solos, to push an amp further into overdrive, or for a beefy, expressive solo tone. It's also great as an 'always on' pedal for adding the finishing touch to your tone; it's like an overall enhancer for your entire sound. The single control knob gives you up to a whopping 34 dB of additional gain for amazing range, from subtle boost to brash chords to a full, fat overdriven lead, while the 3-way Voicing toggle switch lets you sculpt your high end with a boost at 10K, a cut at 4.8K or a flat setting. Use this switch to take the bite out of overly bright single coils, put more sting into a dark humbucker or to add crystal clear, boutique-style airiness to your tone. The Killing Floor is made in the USA and is True Bypass.
$159.00
11900-001 SEYMOUR
DUNCAN
DIRTY DEED
DISTORTION
PEDAL

11900-001

Dirty Deed is a classic analog "dirt" pedal with elements of distortion, fuzz, and overdrive, for rock'n'roll crunch to ear shattering metal tones. The Dirty Deed distortion pedal delivers a wide range of tonal properties designed to capture the character and responsiveness of a classic overdriven tube amp. A pair of MOSFET transistors allow Dirty Deed to evoke tube-like harmonics and lush sustain that come only from dangerously pushed amplifiers. The active EQ provides 12dB of treble and bass boost/cut, making it versatile enough for several different genres. With its thick, beefy distortion, this true-bypass pedal will allow you to get as dirty as you want to be, from a sparkling hard rock crunch to extreme metal overdrive.
$119.95
11900-02

SEYMOUR
DUNCAN VAPOR
TRAIL
PEDAL

11900-02

Vapor Trail is a studio quality analog delay pedal capable of warm, authentic vintage tones with immense clarity and presence. Vapor trail is a true analog delay pedal designed using the famed Bucket Brigade circuitry to provide authentic vintage tone with clarity, warmth and presence. Responsive modulation controls add shimmer and movement to your tone - with the Rate and Depth controls located on the top panel for easy access in live settings. From slap-back echo, ambient and long liquid delays to rotating speaker and long and liquid delays, Vapor Trail delivers a multitude of brilliant sounds. Vapor Trail also features a TRS insert that can send wet signal to any other pedal or effect, such as a flanger or chorus. You can also use it to separate the wet and dry outputs for stereo or recording setups, or plug in any standard volume pedal, and adjust the amount of wet signal with your foot. To round out the special features on this unit, we've made the Delay knob translucent with a cool blue LED that flashes to give you visual feedback on the delay time you have selected - especially handy when you're playing live on a dimly lit stage!
$149.00
11900-03

SEYMOUR
DUNCAN
PICKUP
BOOSTER
PEDAL

11900-03

The Pickup Booster is designed to boost your signal without altering the character of your sound, while allowing you to broaden your tone via the Resonance Switch. The Pickup Booster is for those times you need to be just a little louder, cut through the mix with more clarity, or have to play a song with a distinctive humbucker tone on a single-coil guitar. A true-bypass pedal with class A, low-noise circuit design, Pickup Booster can be used to dial in the tone you need for every situation. It is exceptional at emphasizing a guitar's natural tone while adding some muscle and fatness. The Gain control can be turned down to unity (0dB) with a discrete push-pull output stage for increased drive capability. So even with the Gain knob down at 0dB, your signal chain will sound cleaner - even with long cable runs- essentially acting as a buffer on your pedalboard. Need a humbucker sound out of that vintage Strat? The Resonance Switch makes the pedal interact directly with your pickups, allowing your single-coils to emulate either a chunky humbucker sound perfect for classic rock or blues or a high-output tone for rip roaring solos. You can also use the Pickup Booster for a clean, buffered boost with more headroom and fatten up a humbucker for maximum saturation and sustain - all with the flick of a switch.
$99.00
11900-004 SEYMOUR
DUNCAN
805
OVERDRIVE
PEDAL

11900-004

805 Overdrive Pedal offers classic overdrive with a subtle boost, fat crunch, or a searing tone to your solos. 3-band active EQ shapes your tone just the way you want.Whether you're looking to give your sound a bit of a boost or trying to find harmonically rich heavy gain with warm tube character, the 805 overdrive provides the versatility needed for any type of music - blues, country, rock, metal, and everything in between. The 3-band active EQ, delivers unprecedented control -you can have a smooth, lyrical bluesy tone one minute, and crushing modern metal crunch the next. The 805 is designed to be the perfect overdrive for pushing the front end of an already distorted amp, giving you plenty of output and tone-shaping capability, but can also give your clean tone a controlled boost. Scoop your mids or tighten your hard rock/metal tone in front of a high gain amplifier. Give that solo a searing boost that cuts perfectly through the mix and give your low end rhythm parts controlled crunch. The 805 is capable of any of these and more. Being a true-bypass pedal, it will feel at home on whatever pedalboard you choose.
$139.00
11900-05

SEYMOUR
DUNCAN SHAPE
SHIFTER
PEDAL

11900-05

Shape Shifter is a stereo tremolo designed to deliver the classic textures you love with the capability to render extreme effects such as helicopter chops, piano stabs, or backwards swells.The Shapeshifter is true-bypass stereo pedal that conjures the classic tremolo effects you'd expect, but with complete control over the Wave, Shape, Speed, and Depth of your sound. The pedal allows for shape and wave controls, phase control in stereo, and tap tempo with an LED indicator and ratio option. Tweaking those parameters enables you to capture unique sounds other pedals can't. Go from an "out of this world" phase to a more traditional British tube amp shimmer with the turn of a knob. If you need some non-traditional effects like a helicopter chop or coax an organ or vibraphone sound out of your guitar, the versatility to do so is there. Whether it's a classic tremolo vibe or adding a cool, warbling tone to your pallet of sounds, the versatility of the Shapeshifter can get you there.
$229.00
11900-06

SEYMOUR
DUNCAN VISE
GRIP
PEDAL

11900-06

Vise Grip is a studio-grade compressor pedal designed to enhance the punch, warmth and power of your tone, without sacrificing musicality.Vise Grip is a true bypass analog compressor that delivers studio quality dynamic control without sacrificing tone. Vise Grip's Blend, Attack, Volume, and Sustain allow you the precision to tame loud volume peaks, boost low level signals and blend the amount of compressed and uncompressed signal. Whether you're looking for a more punchy country twang, more sustain and articulation for your searing metal leads, or a funky rhythm "spank", the Vise Grip delivers professional results perfect for both the studio and the stage.
$159.00
11900-012 SEYMOUR
DUNCAN
ANDROMED
DIGITAL
DELAY
PEDAL

11900-012

Seymour Duncan Andromeda Digital Delay Pedal. Fully Programmable Delay with a World of Tones. With the Andromeda Dynamic Delay pedal, Seymour Duncan is unleashing a truckload of control, tones, and connectivity in a deceptively easy-to-use and pedalboard-friendly package. The pedal boasts eight delay voicings that can be manipulated via your playing dynamics, as well as the Andromeda's modulation and saturation controls. The onboard tap tempo with multiple rhythmic subdivisions is just one of the performance-based benefits on the pedal. And you'll control all 128 presets of this powerful pedal with its MIDI capability, USB, and much more. Powerful programmable delay pedal with a bevy of intuitive features. Capable of a wide variety of digital and analog voices. Multiple voicing options, such as Tone, Saturation, and Modulation. Dynamic control changes its sound depending on your playing dynamics. MIDI switchable. Tap tempo with 4 rhythmic subdivisions. 128 preset locations. Fully programmable via the top of the unit. USB connectivity for software updates. 8 types of delay selectable with a rotary switch.
$299.00
11900-008 SEYMOUR
DUNCAN
CATALINA
DYNAMIC
CHORUS
PEDAL

11900-008

A versatile analog chorus with an innovative Dynamic Expression mode, this pedal gives you comprehensive depth control depending on how hard you play. Some guitarists like their chorus to be subtle and traditional. Others prefer bold and unique. The Catalina Dynamic Chorus is designed to do both, with analog character and an unprecedented level of interactivity. It has controls for Mix (from silent to unity to a +3dB boost for the wet signal), Rate, Depth and Delay, as well as a treble-attenuating Tone control for dialing in the clarity or warmth of the wet signal. And the Catalina also features a unique Dynamic switch which allows you to interact with the Depth control as you play: the Hard mode signals the chorus depth to increase as you play with more intensity, or flip it to Soft mode and you will receive more effect as you play lighter. There’s also a Threshold control to dial in the sensitivity of the Dynamic feature. The Catalina has a mono input and stereo outputs, and the footswitch is True Bypass. The Catalina Dynamic Chorus is designed and assembled in Santa Barbara, California.
$229.00
11900-009B SEYMOUR
DUNCAN
BLACK
PALLADIUM
GAIN
STAGE
PEDAL

11900-009B

The Palladium Gain Stage effects pedal is the first stompbox that actually captures the feel and responsiveness of a high gain tube amp. By focusing beyond just the tonal characteristics of Palladium, we designed an innovative architecture that captures the full-bodied depth and character previously unattainable in an effects pedal. You can use it with a power amp or a clean guitar amp to create your ultimate high gain signature sound, and replicate your favorite high gain amp tones. Or use it in front of a distorted amp to tighten up the attack for rhythms or to increase sustain and saturation for solos. However you choose to use Palladium, we hope you hear and feel the impact of great tone, body and depth in your unique sound. Palladium features three gain stages: a gain stage to control the overall saturation, a resonance control for low frequency gain shaping and a boost control that adds overdrive to the beginning of the signal path. These three gain stages allow for a versatile range of tones, from classic rock at lower settings to modern metal at higher gain settings. The pedal also offers a comprehensive EQ, with bass, treble, presence and sweepable midrange-frequency control, so you can make Palladium sound perfect with any amp. Made in the USA.
$299.00
11900-009W SEYMOUR
DUNCAN
WHITE
PALLADIUM
GAIN
STAGE
PEDAL

11900-009W

The Palladium Gain Stage effects pedal is the first stompbox that actually captures the feel and responsiveness of a high gain tube amp. By focusing beyond just the tonal characteristics of Palladium, we designed an innovative architecture that captures the full-bodied depth and character previously unattainable in an effects pedal. You can use it with a power amp or a clean guitar amp to create your ultimate high gain signature sound, and replicate your favorite high gain amp tones. Or use it in front of a distorted amp to tighten up the attack for rhythms or to increase sustain and saturation for solos. However you choose to use Palladium, we hope you hear and feel the impact of great tone, body and depth in your unique sound. Palladium features three gain stages: a gain stage to control the overall saturation, a resonance control for low frequency gain shaping and a boost control that adds overdrive to the beginning of the signal path. These three gain stages allow for a versatile range of tones, from classic rock at lower settings to modern metal at higher gain settings. The pedal also offers a comprehensive EQ, with bass, treble, presence and sweepable midrange-frequency control, so you can make Palladium sound perfect with any amp. Made in the USA.
$299.00
11900-010 SEYMOUR
DUNCAN
FORZA
OVERDRIVE
PEDAL

11900-010

The Forza is a full-range, highly adjustable and transparent overdrive for players who want more gain without losing the natural voice of their guitar. While many overdrives emphasize particular frequencies, the Forza gives you a more even spread across the frequency range. The voicing is very open, and it sounds just as good through a clean channel or hitting an already-overdriven amp. In addition to up to 37dB of gain there’s a three-band EQ for controlling the lows, mids and high end, and the Level control has plenty of range to allow use as a clean boost too. The Forza uses a glass diode, back-to-back stack overdrive circuit. It features True Bypass switching and is made in the USA.
$179.00
TVR1-U MOOER
SHIMVERB
TWIN
REVERB
PEDAL

TVR1-U

The Pro Dual ShimVerb Pedal from Mooer is a powerful reverb and shimmer effects pedal with five reverb algorithms and five shimmer modes. The ShimVerb Pro uses floating-point DSP chips to ensure there is no tone loss. The pedal is capable of generating classic room and electro-mechanical plate and spring reverbs to multi-octave pitch shifting sounds. The pedal features dedicated controls for dry, wet, high cut, low cut, pre-delay, and decay. The two large knobs offer selections for five reverb types and five shimmer modes. A dedicated button engages an additional octave to the shimmer effect, while a switch allows for the trail-on/off function, which toggles between true bypass and buffered bypass modes. The pedal also features a save and recall function for one favorite reverb and shimmer setting.
$118.99
099-4051-000 FENDER
2-BUTTON
VINTAGE
STYLE
FOOTSWITCH

099-4051-000

Restore your vintage Fender amp's footswitch functionality with a genuine replacement Fender footswitch. Features RCA plug and 12-foot cable. Used for: Early Twin Reverb, Deluxe Reverb, Pro Reverb, Super Reverb, Bandmaster Reverb (All vintage amps with dual footswitchable on/off functions requiring RCA connector jack).
$39.99
 
023-4506-000 FENDER
ABY
PEDAL

023-4506-000

Fender's ABY footswitch with passive switcher allows you to plug a single guitar into two amplifiers or plug two guitars into a single amplifier, making it easy and convenient to create a rig with eminent flexibility and a variety of tone options. True hardwire bypass in the off position lets players retain their natural tone without interference or signal loss. "A or B" and "A and B" switching options allow for greater versatility within your rig. Durable metal chassis and switches withstand onstage wear and tear. LED illumination requires 9-volt battery or power source.
$59.99
099-4057-000 FENDER
2-BUTTON
CHANNEL/
CHORUS
FOOTSWITCH

099-4057-000

Restore your contemporary Fender amp's footswitch functionality with a genuine replacement Fender footswitch. Features 1/4" plug and 12-foot cable. Used for: Princeton Chorus, Ultimate Stereo Chorus, Automatic GT, Automatic SE, M80 Chorus.
$39.99
099-4050-000 FENDER
1 BUTTON
VINTAGE
REVERB/
VINTAGE
BANDMASTER/
SHOWMAN
FOOTSWITCH

099-4050-000

Restore your vintage Fender amp's footswitch functionality with a genuine replacement Fender footswitch. Features RCA plug and 12-foot cable. Used for: Princeton, Vibro-Champ, (Original) Fender Reverb (All vintage amps with a single footswitchable on/off function requiring RCA connection).
$39.99
099-4055-000 FENDER
1 BUTTON
VINTAGE
FOOTSWITCH
63 REVERB
PASSPORT PA
Cyber-Twin

099-4055-000

Restore your contemporary Fender amp’s footswitch functionality with a genuine replacement Fender footswitch. Features 1/4" plug and 12-foot cable. Used for: '63 Fender Reverb, Passport P.A., Cyber-Twin (Reverb/Effects Bypass / Vibratone Rotor Speed).
$39.99
023-4513-000 FENDER
MICRO
DI
PEDAL

023-4513-000

With the Fender Micro DI pedal, routing your signal direct to a mixer or pro audio system has never been easier or better-sounding. Using this compact onstage solution, players can quickly and easily convert their unbalanced instrument signal to a balanced P.A.-ready signal while minimizing distortion and ground-level noise. Transmit your signal while attaining quality pro tone, with plenty of pedal board real estate to spare. Balanced and unbalanced I/O options for versatile connectivity Compact footprint to fit on a crowded pedal board. Includes gain switch for boosting low-level signals. Ground lift switch minimizes line-level noise Cabinet simulator for replicating onstage speaker setups. Protective metal housing to withstand the rigors of the road. True hardwire bypass wiring for quiet uninterrupted signal flow 12 mA current draw minimal power supply usage. Power Requirements: AC adapter 9V DC center negative (not included). Input: 1/4" Mono Jack (Impedance: 1 M ). Output: 1/4"Mono Jack (Impedance: 1 k Ohms). Dimensions: 93.5 mm (D) x 42 mm (W) x 52 mm (H). Weight: 140 g.
$66.00
023-4511-000 FENDER
MICRO
COMPRESS
PEDAL

023-4511-000

With its precise control options and a footprint that's perfectly sized for even the most expansive effects rigs, the Fender Micro Compressor is convenient and effective way to even out highs while keeping your signature tone consistent and complex. Small in size and mighty in power, the pedal reduces brightness in peak frequencies and attenuates high-volume attack, giving players smooth, even tone across all notes, increased sustain and enhanced midrange. Compact footprint to fit on a crowded pedal board. Volume, compression and EQ knobs for flexible tone control Protective metal housing to withstand the rigors of the road. True hardwire bypass wiring for quiet uninterrupted signal flow. 10 mA current draw for minimal power supply usage. Power Requirements: AC adapter 9V DC center negative (not included). Dimensions: 93.5 mm (D) x 42 mm (W) x 52 mm (H). Weight: 160g.
$74.99
WVP1 MOOER
LEVELINE
VOLUME
PEDAL

WVP1

A volume pedal is one of the most essential elements in many professional musicians rigs. It can be used in many different ways to adjust signal level or create interesting effects depending where it is used in the signal chain. A common problem with traditional volume pedals, particularly for guitarists with crowded pedalboards, is they are very large and not easy to place in different parts of the signal chain. The MOOER Leveline provides comfortable operation, smooth transition with no loss of tone and a very convenient size for squeezing into tight spots on your pedalboard and easy transportation. Guitar/Bass/Keyboard. Power Requirements: AC adapter 9V DC (center minus plug), recommended to use Mooer Micro Power Current Draw: 40mA. Not included. Dimensions: 128mm (D) X 55mm (W) X 48mm (H) Weight: 460g.
$99.99