SHIELDING ACCESSORIES

 
005-4490-000
JAGUAR
SHIELD
005-4490-000
Genuine Fender pickup/pickguard shield for Jaguar guitar. Original equipment on vintage models. Reduces electrical noise and hum.
$14.99
KGSAS AMERICAN
SERIES
STRAT
SHIELD
KGSAS
Replacement Kluson aluminum pickguard shield, designed to fit the 8 hole and both 11 hole 3 single coil Fender Strats. This is a universal shield that covers 3 models. The price is unbeatable. Replaces Fender Part Number 001-9699-049.
$8.99
001-9699-049
'62 STRAT
SHIELD
001-9699-049
Genuine Fender '62 reissue pickguard shield. Original equipment on early Strats. Predrilled to fit between the pickguard and body to eliminate hum and noise.
$17.99
001-9640-000
ALUMINUM
'57 STRAT SHIELD
001-9640-000
Aluminum vintage series '57 Strat control area shield.
$4.99
 
005-4439-000
JAZZMASTER USA
PICKUP SHIELD
005-4439-000
Genuine Fender Jazzmaster Pickup Shield.
$9.79
EP-4969-SML (6) SOLDER LUG
MINI
GROUNDING
WASHERS
EP-4969-SML
(6) Small, solder lug washers for guitar or bass grounding. Measures: 0.626" (15.9mm) Long; 0.314" (8.0mm) Wide. 0.217" (5.5mm) Large Hole Diameter.
$2.49
EP-4968-000 (8) SOLDER LUG
GROUNDING
WASHERS
EP-4968-000
(8) solder lug washers for guitar or bass grounding. 3/8" hole.
$2.99 OUT OF STOCK
001-0371-070
TELE
GROUND PLATE
001-0371-070
Genuine Fender Ground Plate for Telecaster.
$5.99
EP-4991-000 1 FT. SQ COPPER
SHIELD TAPE
EP-4991-000
1 Ft square of self adhesive copper shieling foil. For eliminating electrical hum and noise.
$7.99
2X5TAPE 2"X5' COPPER
SHIELDING
TAPE
2X5TAPE
2" X 5' self adhesive copper shield foil. Great for the back of pickguards and shielding cavities. A must have for eliminating electrical hum and noise.
$5.99
 
001-4290-020


P BASS
GROUND PLATE

001-4290-020
Genuine Fender grounding plate for P Bass pickups. Reduces noise. Original equipment on early P Basses.
$5.99
001-9723-000


'62 P BASS
PICKGUARD SHIELD

001-9723-000
Genuine Fender '62 P Bass pickguard shield. No wiring necessary. Genuine Fender thin aluminum shielding for the underside of your Precision Bass pickguard helps with noise-cancellation. 13-hole mounting design. Fits American Vintage '62 Precision Bass.
$17.99
001-0686-000 GENUINE FENDER
COPPER
PICKUP SHIELD
FOR JAZZ BASS
001-0686-000
Genuine Fender copper pickup shield for Jazz Bass.
$3.99
001-9659-000


JAZZ BASS
SHIELD PLATE

001-9659-000
Based on Fender's design from the early '60s, this brass plate fits under a Jazz Bass pickup to provide shielding from buzz, hum, and electrical noise. Assembly consists of brass plate, strip of foam rubber for height adjustment, and vintage-style cloth covered ground wire (designed to attach to the volume potentiometer). Brass plate is approximately 3.5" (89 mm) x 0.76" (19 mm).
Used on American Vintage Series (US) Jazz Bass models. Can also be fitted to most vintage basses.
$8.99