 |
(1) 500K DPDT
PUSH/PUSH POT
3/8" US SPEC |
WD500PUSH-US
500k ohm pot with push/push actuator switch used for humbucking pickups. Provides capability for such applications as coil tapping, splitting, and phasing. US 8-32 thread and 24 splines - height of threaded bushing 3/8 in. - length of shaft 3/8 in.
$15.99
|
 |
(1) 250K DPDT
PUSH/PUSH POT
3/8" US SPEC |
WD250PUSH-US
250k ohm pot with push/push actuator switch used for humbucking pickups. Provides capability for such applications as coil tapping, splitting, and phasing. US 8-32 thread and 24 splines - height of threaded bushing 3/8 in. - length of shaft 3/8 in.
$15.99
|
 |
(1) 250K AUDIO
PUSH/PUSH POT |
EP-0283-000
250K push/push audio taper pot. DPDT. 6mm split shaft. Includes nut and dress washer. Great for coil tap, phase, and series/parallel functions.
$14.99
|
 |
(1) 500K AUDIO
PUSH/PUSH POT |
EP-0296-000
500K push/push audio taper pot. DPDT. 6mm split shaft. Includes nut and dress washer. Great for coil tap, phase, and series/parallel functions.
$14.99
|
 |
(1) 500K DPDT
EXTRA LONG
PUSH/PUSH POT
3/8" US SPEC |
WD500XLPUSHUS
500k ohm pot with push/push actuator switch used for humbucking pickups. Extra long. Provides capability for such applications as coil tapping, splitting, and phasing.
US thread and splines - length of threaded bushing 3/4 in. - length of shaft 3/8 in.
$19.99
|
 |
(1) 500K DPDT
PUSH/PUSH POT |
PP500
Allows coil splitting, phase switching and other options without drilling more holes in your guitar. Supplied with two nuts and one washer. Push pot with DPDT switch (on-on). Requires at least a 5/16" (0.312" or 7.94mm) mounting hole. Measures: 2.016" (51.2mm) Overall Height; 1.088" (27.7mm) Depth for Mounting. 6mm split-shaft head. 500k.
$8.99
|