click images to enlarge |
|
 |
OBP-1 Aguilar OBP-1 two band active bass preamp. The OBP-1's boost-only design gives you the tone-shaping benefits of active electronics without losing the inherent sound of the instrument. Discrete, all-FET circuitry features up to 18dB of boost at 40Hz and 4kHz, creating a sonic environment high in dynamic headroom and low in noise. Includes separate bass and treble pots and detailed instructions - uses existing volume pot. 18 volt operation is standard(two 9v batteries). Gain an extra 3.5db with 27 volts. Measures 1.35" x 0.50" x 2.2". Made in the USA. Ten year manufacturer's warranty.
$108.00 |
OBP-3TK Aguilar OBP-3TK three-band active bass preamp. The OBP-3 is Aguilar's most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/- 16dB of cut and boost at either 400Hz or 800Hz and +/- 16dB of treble cut and boost at 6.5 kHz. The OBP-3 has multiple wiring options, and can be wired with either a mini-toggle or internal dip-switch for midrange frequency selection. The "TK" version includes bass, mid, and treble pots. 9 volt operation is standard - gain an extra 6db with 18 volts, and another 3.5db with 27 volts. Includes detailed installation instructions. Uses existing volume pots. Made in the USA. Ten year manufacturer's warranty.
$139.00 |
OBP-3SK Aguilar OBP-3SK three-band active bass preamp. The OBP-3 is Aguilar's most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/- 16dB of cut and boost at either 400Hz or 800Hz and +/- 16dB of treble cut and boost at 6.5 kHz. The OBP-3 has multiple wiring options, and can be wired with either a mini-toggle or internal dip-switch for midrange frequency selection. The "SK" version includes a stacked bass/treble pot and mid pot. 9 volt operation is standard - gain an extra 6db with 18 volts, and another 3.5db with 27 volts. Includes detailed installation instructions. Uses existing volume pots. Made in the USA. Ten year manufacturer's warranty. $139.00 |
|||||||||
OBP-2TK Aguilar OBP-2TK two-band active bass preamp. The OBP-2 was designed to give bassists fat tone while being small enought fit into tight control cavities. Wire this preamp with one 9 volt battery and it will fit into just about any instrument. With +/-18dB of boost and cut at 40Hz and +/- 16dB of treble boost and cut at 6.5 kHz you have can emphasize just the right frequencies to make your bass sound great in any mix. The "TK" version includes two pots for bass and treble with center detent. 9 volt operation is standard - gain an extra 6db with 18 volts. Includes detailed installation instructions. Uses existing volume pots. Made in the USA. Ten year manufacturer's warranty.
$124.00 |
OBP-2SK Aguilar OBP-2SK two-band active bass preamp. The OBP-2 was designed to give bassists fat tone while being small enought fit into tight control cavities. Wire this preamp with one 9 volt battery and it will fit into just about any instrument. With +/-18dB of boost and cut at 40Hz and +/- 16dB of treble boost and cut at 6.5 kHz you have can emphasize just the right frequencies to make your bass sound great in any mix. The "SK" version includes a stacked bass/treble pot with center detent. 9 volt operation is standard - gain an extra 6db with 18 volts. Includes detailed installation instructions. Uses existing volume pots. Made in the USA. Ten year manufacturer's warranty. $124.00 |
||||||||||
OBP-3SK-PP Aguilar OBP-3SK/PP three-band active bass preamp. The OBP-3 is Aguilar's most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/- 16dB of cut and boost at either 400Hz or 800Hz and +/- 16dB of treble cut and boost at 6.5 kHz. The OBP-3 has multiple wiring options, the "SK/PP" version includes a push/pull for mid frequency selection. Includes stacked bass/treble pot, and push/pull mid. 9 volt operation is standard - gain an extra 6db with 18 volts, and another 3.5db with 27 volts. Includes detailed installation instructions. Uses existing volume pots. Made in the USA. Ten year manufacturer's warranty.
$145.00 |
OBP-3TK-PP Aguilar OBP-3TK/PP three-band active bass preamp. The OBP-3 is Aguilar's most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/- 16dB of cut and boost at either 400Hz or 800Hz and +/- 16dB of treble cut and boost at 6.5 kHz. The OBP-3 has multiple wiring options, the "TK/PP" version includes a push/pull for mid frequency selection. Includes bass, push/pull mid, and treble pots. 9 volt operation is standard - gain an extra 6db with 18 volts, and another 3.5db with 27 volts. Includes detailed installation instructions. Uses existing volume pots. Made in the USA. Ten year manufacturer's warranty. $145.00 |
|
|