SEYMOUR DUNCAN
JAZZ BASS PICKUPS

 
SJB-1n SEYMOUR DUNCAN
VINTAGE NECK
PICKUP
JAZZ
BASS®
11401-01

SJB-1n

Seymour Duncan SJB-1n "Vintage" neck pickup for Jazz Bass®. This pickup gives you the traditional sound and look of an early Jazz Bass® pickup. The single coil construction enhances the warmth, brilliance, and harmonics of the instrument. The neck pickup is reverse-wound/reverse-polarity for hum-cancelling when both pickups are used. Traditional black cover with cloth wire leads. Includes mounting hardware and wiring schematic. Made in the USA.
$65.00
SJB-1b SEYMOUR DUNCAN
VINTAGE BRIDGE
PICKUP
JAZZ BASS®
11401-02

SJB-1b

Seymour Duncan SJB-1b "Vintage" bridge pickup for Jazz Bass®. This pickup gives you the traditional sound and look of an early Jazz Bass® pickup. The single coil construction enhances the warmth, brilliance, and harmonics of the instrument. The magnets and coil winding are specially position-calibrated to ensure an even, accurate response and account for string excursion. Traditional black cover with cloth wire leads. Includes mounting hardware and wiring schematic. Made in the USA.
$65.00
SJB-2n SEYMOUR DUNCAN
HOT
NECK
PICKUP
JAZZ BASS®
11402-01

SJB-2n

Seymour Duncan SJB-2n "Hot" pickup for Jazz Bass®. Neck position. This pickup provides extra output with a deep low-end reponse and a heavier midrange than stock pickups. The magnets and coil winding are specially calibrated to deliver an even and accurate sound. Wax potted to reduce unwanted noise and feedback. The neck pickup is reverse-wound/reverse-polarity for hum-cancelling when both pickups are used. Includes mounting hardware and wiring schematic. Made in the USA.
$65.00
SJB-2b SEYMOUR DUNCAN
HOT
BRIDGE
PICKUP
JAZZ BASS®
11402-02

SJB-2b

Seymour Duncan SJB-2b "Hot" replacement pickup for Jazz Bass®. Bridge position. This pickup provides extra output with a deep low-end reponse and a heavier midrange than stock pickups. The magnets and coil winding are specially calibrated to deliver an even and accurate sound. Wax potted to reduce unwanted noise and feedback. Includes mounting hardware and wiring schematic. Made in the USA.
$65.00
SJB-3n SEYMOUR DUNCAN
QUARTER POUND
NECK
JAZZ BASS®
11402-03

SJB-3n

Seymour Duncan SJB-3n "Quarter Pound" pickup for Jazz Bass®. Neck position. This pickup is for musicians who want maximum output and extended frequency range. Large quarter-inch wide pole pieces expand the magnetic field and extend the frequency range from low to high end for a fat, full, punchy sound with midrange presence. The neck pickup is reverse-wound/reverse-polarity for hum-cancelling when both pickups are used. Includes mounting hardware and wiring schematic. Made in the USA.
$65.00
SJB-3b SEYMOUR DUNCAN
QUARTER POUND
BRIDGE
JAZZ BASS®
11402-04

SJB-3b

Seymour Duncan SJB-3b "Quarter Pound" pickup for Jazz Bass®. Bridge position. This pickup is for musicians who want maximum output and extended frequency range. Large quarter-inch wide pole pieces expand the magnetic field and extend the frequency range from low to high end for a fat, full, punchy sound with midrange presence. Includes mounting hardware and wiring schematic. Made in the USA.
$65.00
STK-J1n SEYMOUR DUNCAN
CLASSIC STACK
NEC
K
JAZZ BASS®
11403-01

STK-J1n

Seymour Duncan STK-J1n "Classic Stack" pickup for Jazz BassŪ. Neck position. Duplicates the great tone, presence, and response of a vintage Jazz BassŪ without the single coil hum. Four-conductor shielded cable allows you to split the coils electrically: in/out of phase, series or parallel, with/without hum cancelling. Includes mounting screws and wiring diagram. Made in the USA.
$85.00
STK-J1b SEYMOUR DUNCAN
CLASSIC STACK
BRIDGE
JAZZ BASS®
11403-02

STK-J1b

Seymour Duncan STK-J1b "Classic Stack" pickup for Jazz BassŪ. Bridge position. Duplicates the great tone, presence, and response of a vintage Jazz BassŪ without the single coil hum. Four-conductor shielded cable allows you to split the coils electrically: in/out of phase, series or parallel, with/without hum cancelling. Includes mounting screws and wiring diagram. Made in the USA.
$85.00
STK-J2n SEYMOUR DUNCAN
HOT STACK
NECK

JAZZ BASS®
11403-03

STK-J2n

Seymour Duncan STK-J2n "Hot Stack" replacement pickup for Jazz Bass®. Neck position. The stacked coil design gives you extra output for punchy tone with great harmonics. Four-conductor shielded cable allows you to split the coils electrically: in/out of phase, series or parallel, with/without hum cancelling. Includes mounting hardware and wiring schematic. Made in the USA.
$85.00
STK-J2b SEYMOUR DUNCAN
HOT STACK
BRIDGE

JAZZ BASS®
11403-04

STK-J2b

Seymour Duncan STK-J2b "Hot Stack" replacement pickup for Jazz Bass®. Bridge position. The stacked coil design gives you extra output for punchy tone with great harmonics. Four-conductor shielded cable allows you to split the coils electrically: in/out of phase, series or parallel, with/without hum cancelling. Includes mounting hardware and wiring schematic. Made in the USA.
$85.00